You can skip this in seconds

Click here to continue

Download Now!

Intel Verify Marker Utility 10.8

Intel Verify Marker Utility 10.8

Intel Verify Marker Utility Publisher's Description

The Verify Marker utility is provided for customers to initiate parity recalculation for RAID 5 volumes.

A RAID 5 volume using Intel Rapid Storage Technology (iRST) 10.5 and 10.6 may become unbootable after replacing a hard drive. 

If you have iRST 10.5 or 10.6 and you have a RAID 5 volume, we recommend you upgrade to iRST 10.8 and then run VerifyMarker.exe to recalculate the parity (or manually run "verify and repair" in the 10.8 iRST utility).

The system must contain an Intel Pentium Processor and one of the following Intel products:
- Intel(R) ICH8R/ICH9R/ICH10R/DO/5 Series/3400 Series SATA RAID Controller.
- Intel(R) ICH8M-E/ICH9M-E/5 Series SATA RAID Controller.

Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.

Note: Try to set a system restore point before installing a device driver. It will help you restore system if  installed  driver not complete.

Look for Similar Items by Category


Popular Downloads